Even more - Why We Are the Big and Custom Safe & Vault Door Specialists.

Part six of five:

Five of five segments last week just wasn’t enough to show you what goes on here at Vault Pro. So, part six of five is simply a continuation of last week’s showcase showing more custom stuff that didn’t quite make the first cut but is still pretty cool. Enjoy.

Ultimate Wall Safe

Ultimate Wall Safe with super thick steel, stainless steel
and American made interior L.E.D. custom lighting.

I usually don’t like to build small safes but this was a pretty cool idea and it turned out really cool and really heavy.  Super thick steel, stainless steel, and then more steel make up this small but mighty wall safe.  It is built to fit into an already existing concrete wall opening.  If the wall should ever crush, this safe will live on.  The American made L.E.D. lights are automatic and turn on when the door is opened revealing the contents of the safe.  After its intended concealment few will ever see the safe and even fewer its interior.
 
Pour in place Vault Door with Rebar Extensions

7' x 4' Executive Series Vault Door featuring
Rebar extensions for pour in place installation.
CLICK IMAGE TO ENLARGE

 
At 7 foot tall and 4 feet wide, this in-swing hinged Executive Series Vault Door is built to be tied to rebar and poured in place in a monolithic concrete structure.

In swing Escape Hatch.

 

There is also a 36” x 36” in-swing hinged Pro Escape hatch to match. The escape hatch received a primer coating and will be finish painted after in place installation.





 


Pour in place or Lag-in, Ballistic Resistant Vents

AR500 louvers and backing will repel or capture just about anything shot at it while allowing ample air flow into your vault.  When closed the door seals on a Palusol gasket that is designed to seal in the case of fire. 

Thanks for all the positive feedback. Stay tuned for even more. We are always innovating and creating the finest safes, doors and shelters for our customers.

Tony

For more information please visit us on the Web: Vaultprousa.com

Why We Are the Big and Custom Safe & Vault Door Specialists

Part Five of Five:

"Beer Money" The Biggest, Baddest and
Heaviest Safe ever built by Vault Pro USA.

By far the heaviest gun safe I have ever built, this Monster Gun Safe™ (nicknamed “Beer Money”) not only dwarfs all of our competitor’s standard safes, it by far outweighs every other gun safe on the market.  Graffunder you say…huh…not even close.  The inside layer of stainless steel alone weighs more than my car and there is at least three times more steel in the body of this Monster than there is stainless. The “Safe in Safe” weighs more than most of my competitors safes in their entirety and there is enough space in the hidden floor compartment to stash away over a ton of ammo. 

One Way George laid down a Platinum Gloss Finish and the Crazy Painter Tom Kelly, as only Tom Kelly can…created a one of a kind piece of art that anyone would be proud to own…as proud as I am to be showing it to you now.  However, out of respect for our client and in keeping with our standards of confidentiality, we have chosen to blur the words at the top of the safe.  I am sorry that you don’t get to see it (it too is beautiful) & I hope you can understand.  Keep in mind that personal information will be kept strictly confidential and never traded or sold to any one for any reason by Vault Pro.

It has been a fantastic week here at Vault Pro.  I really enjoyed showing you some of what I see here every day.

Stay tuned for even more... 

Tony 

Don't forget to catch us on the Web at: Vaultprousa.com

Why We Are the Big and Custom Safe & Vault Door Specialists

Part four of five: 

This Monster Vault Door features four massive
pin bearing hinges each rated at over 2000 lbs.!
CLICK ON IMAGE TO ENLARGE

One very lucky gold mine in South America will be installing this Custom Monster Vault Door™ on their gold storage vault.  The door and frame on this thing weighs so much that our forklift won’t lift it…not even a little bit.  Check out those hinges, each pin bearing hinge is load tested and rated at over 2000 lbs. This door needed four of them to be safe. You can push the door with the slightest touch of a finger and the gap between the door and frame is (as always) less than 1/16th of an inch.  You don’t want to close your finger in this door.  Check out that 1” solid bent steel frame.  Ask any of our competitors if they can bend a 1” solid steel frame for your door. 

This Monster Vault Door™ (large enough to drive your forklift thru) proves once again that Vault Pro is your big and custom safe and vault door specialist.

How big is this Monster Vault Door?
Large enough to drive a forklift through.

Stay tuned for part 5

Tony

Be sure to visit us at: Vaultprousa.com

Why We Are the Big and Custom Safe & Vault Door Specialists - Part 3 of 5

Part three of five:

One Bad Ass Custom Gun Safe featuring
Shelby Stripes, Ford logo and Eagle by Tom Kelly

It isn’t the biggest safe leaving here today but it is undeniably one “Bad Ass Safe”.  Metallic Oval Blue and twin white Shelby stripes by One Way George along with some all American red, white and blue Pinstripes and artwork by the one and only Crazy Painter Tom Kelly make this custom Huntsman II the most custom safe leaving here today.  LA Gard Digital Lock and polished solid stainless steel 5-prong handle finish the appearance package on this  100% American Made Huntsman II that is also equipped with full electricity, automatic L.E.D. Lighting (also American made), Pistol Pro Door Backing and 2300° Ceramic Fireproofing under a heavier than normal layer of cold rolled steel.  What’s more American than that?

Detail on Eagle and Ford logo are unbelievable.

Part 4 tomorrow.

Tony

Be sure to visit us at: Vaultprousa.com

Why We Are the Big and Custom Safe & Vault Door Specialists

Part two of five:

THE MONSTER GUN SAFE™
The only TRUE 100 Gun Safe.

Vault Pro’s Monster Gun Safe™ is the only choice when you want the very best and size matters.  The Monster Gun Safe™ is the only true 100 long gun safe available as a standard size today.  Others will tell you that you can stack on the shelves or creatively cram to fit up to 100 long guns in their safes, but only Vault Pro builds the Monster Gun Safe™. 

Black matte finish and silver dual pinstripe with matching 5-prong handle and hardware subdue the beast that is the Monster Gun Safe.  This Monster will safe keep even the most distinguished collections and valuables.  Ever heard of someone stealing a safe…yea right, better bring a crane.

This Bad Boy will hold up to 100 long guns and
you don't have to cram them in.

Stay tuned for Part 3.

Tony

Be sure to visit us at: Vaultprousa.com

Why We Are the Big and Custom Safe & Vault Door Specialists

In keeping with our reputation of being your big and custom gun safe specialists, we are building even bigger safes and vault doors, and doing more custom work now than ever before.  To prove my point, starting today and every day this week I will pick one of the biggest or most custom products from our finish line and showcase it for you on the day it ships from Vault Pro.

Part one of five:

Giant Custom Safe built by Vault Pro for U.S. Mint

This giant safe barely fit in the semi
used to transport it to the U.S. Mint.

Vault Pro was the first and only choice for the U.S. Mint Headquarters when they needed a custom safe.   Check out the picture of this safe on the truck, this thing is huge.  In fact, any larger and we wouldn’t be able to fit it into a truck.  The same quality and exacting standards go into every one of our safes.  If you need something built like the one the U.S. Mint has or maybe you want to go really big, Vault Pro will be happy to build an all American made safe or security solution just for you.

Stay tuned for part 2

Tony 

Be sure to visit us at: Vaultprousa.com